Appliances are a mixed bag in Home Assistant. Some brands have core integrations, some rely on HACS add-ons, and some depend on a cloud account. This guide covers Roborock, myQ, Orbit B-hyve and Bambu Lab, with the local and cloud options for each.
Quick answers
- Roborock: core integration, added in Home Assistant 2023.5.
- myQ: no official integration. Home Assistant removed it in 2023.12.
- Orbit B-hyve: HACS integration, cloud-based, with a Bluetooth option for some devices.
- Bambu Lab: HACS integration (ha-bambulab), over LAN or cloud.
Roborock vacuums
Roborock has a core integration. You sign in with your Roborock account email and the code sent to that address. Login and maps go through the cloud, and local control is used where your model supports it. Even with local control, you need that one-time cloud login.
The integration exposes:
- The vacuum entity, with its state and controls
- Battery level and consumables, such as brushes and filters
- Do Not Disturb, mop and fan modes
- Map images, where your model supports them
To clean specific rooms, use the vacuum.send_command action with the app_segment_clean command and the segment IDs for your rooms.
Model support varies. The integration covers the Q7 Max and Max+, and some newer Q-series models use protocols it doesn’t support yet. Check the integration’s documentation for your exact model before you buy.
Valetudo is an open-source firmware option that avoids the cloud, but it requires rooting the vacuum. Research the steps and risks first.
myQ garage doors
Home Assistant has no official myQ integration. Chamberlain blocked third-party access to myQ in late 2023, and Home Assistant removed its myQ integration in December 2023. The myQ app also works only with openers that support myQ, so check compatibility before you rely on it.
Two routes remain:
- Community cloud integrations. A HACS project can sign in to your myQ account and poll the cloud. It depends on the vendor’s service staying stable, so it can break without warning.
- Local hardware. Controllers such as ratgdo and the Konnected GDO blaQ connect to the opener’s wall-control terminals and work without the myQ cloud. Tailwind, Meross and a DIY relay with a door sensor are other options.
For a full breakdown of which openers work with local controllers, see what garage door opener works with Home Assistant.
Orbit B-hyve irrigation
Orbit B-hyve timers, sprinkler controllers and flood sensors connect through HACS integrations. There are two options:
- B-hyve (cloud): The main option. It signs in with your Orbit account and exposes zones, programs, rain delays and sensor data.
- B-hyve BLE (local): For supported Bluetooth-enabled devices. It uses your Orbit account once to get network keys, and then controls devices over Bluetooth Low Energy, so they keep working without internet access.
To set up the cloud integration:
- Set up your device and any Wi-Fi hub in the B-hyve app first.
- Install the integration from HACS, then restart Home Assistant.
- Go to Settings > Devices & services > Add integration, search for the B-hyve integration, and sign in with your Orbit email and password.
Hose timers need the B-hyve Wi-Fi hub. Watering programs usually have to be created in the B-hyve app before you can start or update them from Home Assistant. Many users keep base schedules and weather logic in the app, and use Home Assistant for triggers such as sensors or buttons.
Bambu Lab 3D printers
The ha-bambulab integration, installed from HACS, monitors Bambu Lab printers. It shows print progress, nozzle and bed temperatures, AMS filament, errors and camera feeds.
There are two connection modes:
- LAN mode: Enter the printer’s serial number, IP address and access code. Home Assistant connects to the printer over TLS on port 8883, which keeps traffic on your network.
- Bambu Cloud: Sign in with your Bambu Lab account. You can add the printer’s local IP address for faster, more direct sensor updates.
Firmware matters. Since early 2025, Bambu Lab firmware has limited third-party control unless the printer is in LAN-only or developer mode. Monitoring generally still works, but controls can stop after a firmware update. Read the integration’s notes before you update the printer. Some camera feeds need the local IP address or LAN liveview enabled.
Printer safety matters too. Nozzles run at around 200 to 300 °C, so don’t start a print remotely unless someone can check on it.
Other appliance integrations
Several brands have core integrations, including Home Connect, LG ThinQ and SmartThings. Matter devices can also connect directly. Check the integration list before you look for a HACS option.
For how integrations and devices fit together, see adding and managing devices in Home Assistant. If your appliance is Matter, why a Matter device won’t pair covers the common fixes.