Smart Home Basics

Do Smart Home Devices Work Without Internet?

Some smart home devices keep working during an internet outage and others stop. Learn what works locally, what needs the cloud and how to test your own setup.

On this page
  1. Internet outage, Wi-Fi outage and power outage
  2. Device by device
  3. Why local control matters
  4. Hubs that keep local control
  5. Backup power and connectivity
  6. Safety: don’t rely on the app
  7. Test your own setup
  8. Checklist before you buy
  9. Where to go next

Some do, and some don’t. It depends on how each device connects and whether a local hub or your own network controls it. Devices controlled on your home network or by a local hub often keep working through an internet outage. Cloud-only devices usually stop taking commands from their app. Power outages are a separate problem, because if the router and hub lose power, many local features stop too.

Internet outage, Wi-Fi outage and power outage

These are three different problems:

  • Internet outage, power on. Local devices keep working. Remote control, cloud recording, cloud-based automations and firmware updates usually stop. Voice requests to Alexa or Google usually stop too.
  • Router or Wi-Fi outage, power on. Wi-Fi devices lose their connection. Zigbee and Z-Wave devices can keep working if a local hub is powered and runs its automations without the cloud.
  • Power outage. Anything plugged in stops unless it has battery backup. Battery sensors keep detecting, and battery-powered sirens keep sounding. Hardwired smoke alarms switch to their backup batteries.

Device by device

Device Internet down Power out (no backup) Notes
Smart bulbs on a local hub Keep working Stop Bulbs lose power when the wall switch is off
Wi-Fi plugs and bulbs Often stop Stop Check the manual for local control
Smart thermostats (such as Nest or ecobee) Schedules and manual controls keep working; app control stops Stop, and heating or cooling stops with them Check the manual
Cameras Local recording continues on an SD card or NVR; cloud recording and alerts stop Stop unless backed up Check whether storage is local
Smart locks Keypad, key and Bluetooth usually work; remote unlocking stops Battery locks keep working; keys always work Check the manual
Smoke and CO alarms Sound locally; no phone alert Sound on backup battery Phone alerts depend on Wi-Fi
Leak sensors Sound only if they have a siren Battery sirens still sound App-only sensors can’t tell you anything
Alexa and Google speakers Most voice requests stop Stop Some newer speakers handle a few basic commands on the device, but don’t rely on that

Why local control matters

Local control means the device or hub responds on your own network without a round trip to a vendor’s server. That has two practical benefits. Commands tend to be quicker, and they keep working during an internet outage. Local control also protects you if a company stops running its cloud service.

The shutdown risk is real. Revolv hubs stopped working in 2016 when their service was shut down. Insteon announced a shutdown in 2022, and its brand later returned under new owners. Google ended app support for first- and second-generation Nest thermostats in 2025.

Check the manual for terms such as “local control,” “works without internet” or “local API.” Local voice is a separate matter. A device may respond to the app locally while voice commands still go to the cloud.

Hubs that keep local control

  • Home Assistant runs fully on your own hardware. Remote access needs internet and a service such as Nabu Casa or a VPN.
  • Hubitat is a local hub for Zigbee, Z-Wave and other devices.
  • Philips Hue Bridge controls Hue lights locally.
  • Apple Home controls devices on your local network, but remote access needs internet and a home hub.

Not every hub is local. Check whether the hub’s automations run on the hub itself or in the cloud.

Backup power and connectivity

  • Battery backup. A small uninterruptible power supply (UPS) on the modem, router and hub can keep local control running through a short power cut. It only lasts as long as its battery.
  • Cellular backup. Some security systems and hubs can send alerts over a cellular connection when home internet fails. This is worth considering if you are often away.
  • Hardwired alarms. Replace backup batteries as the alarm’s instructions describe, typically at least once a year, and test alarms regularly.

Safety: don’t rely on the app

Smoke and CO alarms are designed to sound in the home without Wi-Fi. A phone notification is useful when you’re away, but it isn’t what protects a sleeping household. If a smoke or CO alarm sounds, get outside and call emergency services. Don’t wait for an app alert. Don’t replace certified alarms with uncertified smart sensors, and don’t rely on an app-only leak sensor to warn anyone while the network is down.

Portable generators are a separate risk. They produce carbon monoxide, which you can’t see or smell. Never run one indoors, in a garage or in another enclosed space. Keep it at least 20 feet from the house with the exhaust pointed away, and make sure your CO alarms have working batteries. Connecting a generator to your home’s wiring is licensed electrician work.

Test your own setup

You can find out what works in about ten minutes:

  1. List your devices and how each one connects: Wi-Fi, a hub, Matter or cloud-only.
  2. Unplug the router or internet connection for a few minutes.
  3. Try each device from its wall switch, its app and your voice assistant. Note what responds.
  4. Trigger a sensor. For a leak sensor, touch a damp cloth to its probes. For an alarm, press its test button.
  5. Plug the router back in and check whether the missed events or alerts show up in the app.
  6. Fix the gaps. Add a local hub, buy sensors with sirens, add a UPS or choose devices with local control.

Checklist before you buy

  • Does the manual say the device works locally or without internet?
  • Does it need a hub, and does that hub run its automations on-site?
  • Does a leak sensor have its own siren?
  • Can you still operate it with a wall switch, a key or another manual control?
  • What happens to the device if the company shuts down its service?

Where to go next

For protocol choices that affect offline behavior, see Matter vs Zigbee vs Z-Wave. For a platform that can run locally, read Alexa vs Google Home vs Home Assistant. For a broader overview, start with smart home basics.

The complete guide to smart home basics

Smart Home Basics: Device Types, IoT and How Home Automation Works
Read the guide

Keep exploring

Guides from other topics

All topics →