Short answer: yes, but with third-party tools
Wyze cameras can work with Home Assistant, but Wyze doesn’t provide an official integration or a supported local API. You’ll need a third-party tool, and the options differ in how much video they provide and how much they change the camera.
Option 1: docker-wyze-bridge
The docker-wyze-bridge project, by mrlt8, turns Wyze cameras into RTSP, HLS, and WebRTC streams without changing the camera’s firmware. It’s available as a Home Assistant add-on and is a common choice for video.
To set it up, you’ll need:
- The email address and password for your Wyze account
- A Wyze developer API key and Key ID. The bridge has required these since 2024, so check the project’s current instructions.
By default the bridge uses these ports: RTSP 8554, HLS 8888, WebRTC 8889, and the web UI on 5000. A stream address looks like rtsp://<ha-ip>:8554/<camera-name>. You can add the stream to Home Assistant with the Generic Camera integration, or send it to Frigate for recording and detection.
Two caveats:
- The bridge streams locally over Wyze’s P2P protocol, but it still needs cloud authentication. It isn’t fully offline.
- Wyze firmware or app updates have broken the bridge before. Check its compatibility list, and consider holding off on firmware updates until the bridge confirms support.
Option 2: Wyze’s RTSP beta firmware
Wyze released an RTSP beta firmware for some older models: v2, v3, and Pan v1 and v2. It’s old and no longer maintained, and it doesn’t include newer features. Treat it as a legacy option.
Option 3: Open firmware
Community firmware can give a camera native RTSP. Two examples are wz_mini_hacks, which supports v2, v3, and Pan v2, and Thingino, which works on some models. Flashing custom firmware can brick a camera and can end manufacturer support. Only try it if you’re comfortable recovering a device that fails.
Option 4: wyzeapi (no video)
The wyzeapi integration by SecKatie is installed through HACS. It adds Wyze locks, bulbs, plugs, and sensors, and it can turn cameras on or off and control the siren. It doesn’t provide any video.
Quick comparison
| Option | Video in Home Assistant | Changes camera firmware | Main caveat |
|---|---|---|---|
| docker-wyze-bridge | Yes (RTSP, HLS, WebRTC) | No | Needs cloud login and API keys |
| Wyze RTSP beta firmware | Yes | Yes | Old, unmaintained, limited models |
| Open firmware (wz_mini_hacks, Thingino) | Yes | Yes | Can brick the camera; limited models |
| wyzeapi | No | No | Controls devices, but no video |
Which models are supported?
Support varies a lot by model. The v4, OG, Pan v3, and battery cameras have patchy support or none. There’s no RTSP firmware for the v4 or newer models. Check the bridge’s current compatibility list before you buy or flash anything.
Wi-Fi and performance
Wyze cameras use 2.4 GHz Wi-Fi. Each stream adds load to the camera and to your network, so several simultaneous streams can cause problems. Keep the number of streams low, and use lower-resolution streams for dashboards where possible.
Security and firmware risks
Wyze has had several security incidents, including a 2019 data leak and feed-exposure bugs in 2023 and 2024. Protect your Wyze account with a strong, unique password, and turn on two-factor authentication if Wyze offers it for your account. Keep cameras on a separate network where your router supports it.
Open firmware and beta firmware both change the camera’s software. Read the project’s current instructions, and understand that a failed flash can leave a camera unusable.
Common misconceptions
- “Wyze works with Home Assistant out of the box.” It needs third-party tools.
- “The bridge works fully offline.” It needs cloud authentication.
- “RTSP firmware is available for every model.” It isn’t available for the v4 or newer models.
- “wyzeapi provides camera video.” It doesn’t.
Related guides
- Arlo or Wyze: how the brands compare on price, storage, and subscriptions
- Home Assistant cameras: RTSP setup for any camera
- Frigate and Home Assistant: NVR setup for the streams