Cameras and Doorbells

Ring and Blink Cameras in Home Assistant

Connect Ring and Blink cameras to Home Assistant with the official integrations, what each exposes, the cloud limits, and the Sync Module Blink needs.

On this page
  1. Ring and Blink both run through Amazon’s cloud
  2. Option 1: The official Ring integration
  3. Option 2: The ring-mqtt add-on
  4. Blink in Home Assistant
  5. Blink actions you can automate
  6. Account and privacy tips
  7. Cloud or local: how to choose

Amazon owns both Ring and Blink. Both brands are cloud-only. Neither offers a native RTSP stream or a local API, so Home Assistant connects through each brand’s account. Setup needs your account login and a two-factor authentication (2FA) code. Video, events, and history depend on Amazon’s services.

Option 1: The official Ring integration

Ring has a core Home Assistant integration. To set it up:

  1. Go to Settings > Devices & services > Add integration and choose Ring.
  2. Sign in with your Ring account and enter the 2FA code.
  3. Confirm the setup. Your Ring devices should appear as entities.

Ring lets you share access with a second account. Many people set up a dedicated shared-user account for Home Assistant where possible, so the integration doesn’t use their main login.

What the Ring integration exposes

  • Ding and motion events that fire when someone presses the doorbell or motion is detected. Events arrive through a push listener, so they’re near real-time.
  • Battery level, Wi-Fi signal, and light and siren switches on devices that have them
  • Chime volume controls

Live view works in recent versions of Home Assistant. Releases from late 2024 onward show Ring live view through WebRTC. Older versions showed only the last recording. Viewing past recordings needs a Ring subscription.

Can Home Assistant control Ring cameras?

Partly. The official integration gives you events, some switches, and live view in recent versions. It doesn’t make a Ring camera behave like a local camera you control the way you would an RTSP camera, and past video depends on a Ring plan. For more control, some people look at the ring-mqtt add-on, covered next.

Option 2: The ring-mqtt add-on

ring-mqtt is a community project by tsightler, packaged as a Home Assistant add-on. It publishes Ring alarm, camera, and doorbell states over MQTT, so you’ll need an MQTT broker. On demand, it can also serve camera streams over RTSP through go2rtc.

Keep these limits in mind:

  • It’s a third-party project, not an official Home Assistant integration.
  • It’s still cloud-dependent. Its RTSP output re-streams the cloud feed, so it doesn’t give you a local camera.
  • Changes to Ring’s services can break community tools, and you may need to update the add-on.

Blink has a core Home Assistant integration. Setup needs your Blink username, password, and a 2FA PIN sent by email or SMS. Each camera gets entities for:

  • a camera that shows snapshots and preview thumbnails
  • motion, battery, and temperature sensors, plus Wi-Fi strength
  • an alarm control panel to arm and disarm the Sync Module’s system
  • a switch to turn motion detection on or off

A Sync Module is required for most cameras

Most Blink cameras connect through a Sync Module. Check the model’s requirements before you buy. Saving clips also needs either a Blink subscription or a Sync Module 2 with USB storage.

Snapshots and clips, not a live stream

Blink entities show the last clip or snapshot. Blink doesn’t provide a live stream the way a local camera does, and support for live view varies. Motion alerts are also delayed, because updates depend on cloud polling. The default scan interval is about 300 seconds, or five minutes.

Polling, battery life, and login issues

Frequent snapshots drain battery cameras, on both brands. Faster polling also risks rate limits. Some users report login loops after a restart or update, often tied to 2FA changes. A later Home Assistant core update sometimes fixes these, so check the release notes before you troubleshoot for hours.

  • blink.trigger_camera asks a camera for a fresh snapshot
  • blink.save_video and blink.save_recent_clips save clips, subject to the storage requirements above
  • blink.send_pin enters a 2FA PIN when Blink asks for one

Account and privacy tips

  • Use a dedicated shared-user account for Home Assistant where possible.
  • Keep your 2FA method up to date.
  • Check current subscription terms. Plans change often and vary by region.

Cloud or local: how to choose

If you want a local live feed in Home Assistant, look for cameras that support RTSP or ONVIF. With Ring or Blink, expect event-based automations and occasional snapshots, not continuous video. The Home Assistant cameras guide explains the local options. For the cost of Ring’s cloud history, see whether a Ring doorbell has a monthly fee.

The complete guide to cameras and doorbells

Home Assistant Cameras: Adding RTSP Streams and Choosing Cameras
Read the guide

Keep exploring

Guides from other topics

All topics →