Before you start: create a Camera Account
Most Tapo setups need a camera account, which is separate from your TP-Link cloud login. In the Tapo app, open Camera Settings > Advanced Settings > Camera Account and create a username and password. Use those credentials in Home Assistant, not your TP-Link email and password. Menu names can vary by app version.
Some integrations also ask you to turn on Third-Party Compatibility in the app. Check the integration’s documentation for your setup.
Three ways to add a Tapo camera
- Generic Camera or the ONVIF integration. You get video plus ONVIF motion events.
- Tapo: Cameras Control from HACS. It adds controls such as PTZ, privacy mode, LED, night vision, alarm, and motion switches.
- The core TP-Link integration. Home Assistant added Tapo camera support to it around version 2025.1. Model support varies.
Avoid running two integrations against the same camera at the same time, because they can conflict.
Option 1: Generic Camera with RTSP
Tapo RTSP addresses follow this pattern:
rtsp://user:password@192.168.1.60:554/stream1
stream1is the main HD stream.stream2is the substream, about 640×360. It’s a better choice for dashboards.
Add the camera through Settings > Devices & services > Add integration > Generic Camera, as described in the Home Assistant cameras guide. If you use the ONVIF integration instead, note that Tapo’s ONVIF port is 2020, not 80.
Option 2: Tapo: Cameras Control (HACS)
Install Tapo: Cameras Control by JurajNyiri from HACS, restart if prompted, and then add it under Settings > Devices & services. It adds controls beyond the video feed. Newer firmware may ask for your TP-Link cloud password for this integration, depending on the version.
Option 3: The core TP-Link integration
Home Assistant’s core TP-Link integration added Tapo camera support around version 2025.1. Model support varies, so check the integration’s documentation for your model before you rely on it.
Which models support RTSP?
- Most wired models support RTSP. The C100, C200, C210, C220, C310, C320WS, C500, and C520WS are examples that work.
- Battery models, such as the C400, C420, and C425, generally don’t offer RTSP. Some work only through a hub.
Check the model’s specifications, and confirm that RTSP is turned on in the app.
Concurrent connections and restreaming
Tapo cameras limit simultaneous RTSP sessions. The exact number is uncertain, and it may be around two or three. If Home Assistant, Frigate, and other apps all need the stream, restream it through go2rtc or Frigate rather than connecting each one directly to the camera. See the Frigate guide for multi-camera setups.
Storage, Wi-Fi, and internet access
- Most models support microSD recording up to about 256 to 512 GB, depending on the model. Tapo Care is an optional subscription.
- Most models use 2.4 GHz Wi-Fi only.
- Blocking internet access keeps local streaming working, but time sync and some app features may break.
Common problems
- The feed is black. Privacy mode stops the stream, so check that it’s off in the app.
- The stream works in VLC but not in Home Assistant. Check the address, the credentials, and whether RTSP is enabled on the camera. The black feed guide walks through the stream checks.
- The camera keeps disconnecting. Check the Wi-Fi signal, and count how many apps are connecting to the same camera at once.
Common misconceptions
- “Use your TP-Link cloud email for RTSP.” Use the camera account.
- “All Tapo cameras support RTSP.” Battery models generally don’t.
- “ONVIF is on port 80.” For Tapo, the ONVIF port is 2020.
- “Home Assistant needs a Tapo subscription.” It doesn’t.
Related guides
- Frigate and Home Assistant: NVR setup for multiple streams
- Why is my camera feed black?: troubleshooting
- Home Assistant cameras: RTSP basics