Short answer
Get a Raspberry Pi 5 with 4 GB of RAM. It’s the best choice for most new builds. Choose the 8 GB Pi 5 for heavier setups with many add-ons or camera processing. A Raspberry Pi 4 with 4 GB is a solid, cheaper option for a typical home. Skip the Raspberry Pi 3, the Pi Zero 2 W and the Pi 2.
Which model to pick
| Model | Verdict |
|---|---|
| Raspberry Pi 5, 4 GB | Best choice for most people. Fast enough for typical automations and add-ons. |
| Raspberry Pi 5, 8 GB | For many add-ons, camera processing, local voice or heavy use. |
| Raspberry Pi 4, 4 GB | Budget pick for basic to moderate setups. |
| Raspberry Pi 4 or 5, 2 GB | Runs a basic setup, but leaves little room for add-ons. |
| Raspberry Pi 3 B or 3 B+ (1 GB) | Too little memory for a main hub. Not recommended for new builds. |
| Raspberry Pi Zero 2 W or Raspberry Pi 2 | Not suitable. Too slow and short on memory. |
How much RAM do you need?
- 2 GB is the practical minimum.
- 4 GB is enough for a typical home with several add-ons.
- 8 GB helps once you run many add-ons or heavy workloads.
Beyond 4 GB, extra memory mainly helps with many add-ons. It won’t make a simple setup faster.
Storage: microSD or SSD?
Use an SSD if you can. Home Assistant writes to its database constantly, and microSD cards wear out under that kind of write load. If you use a microSD card, choose a 32 GB or larger card with an A2 rating, and keep backups off the card.
A Pi 5 can boot from an NVMe drive with the M.2 HAT+. A Pi 4 can boot from a USB 3 SSD, but it needs a bootloader from late 2020 or newer.
Power and cooling
- Pi 5: use the official 27 W USB-C supply (5 V, 5 A).
- Pi 4: use the official 15 W USB-C supply (5.1 V, 3 A).
- Both: an underpowered supply causes random crashes and storage corruption. A phone charger often isn’t enough for a Pi 5.
- Pi 5 cooling: the Pi 5 runs warm under load. Use the official Active Cooler or a ventilated case.
Should you buy a mini PC instead?
Maybe. A Pi 5 kit with a power supply, a case, a cooler and an SSD can cost close to a small mini PC. Many users choose the mini PC for more performance and storage per dollar. A Pi is still a good choice when you want low cost, low power and a small footprint.
Pi prices have moved over the past year, so compare current prices before you buy.
Next steps
- For the flashing and onboarding steps, read how to set up Home Assistant on a Raspberry Pi.
- If you start on a microSD card, move Home Assistant from an SD card to an SSD when you’re ready.