Short answer
Buy Home Assistant Green if you want a plug-and-play box for most homes. Consider Yellow only if you want a built-in Zigbee or Thread radio, an NVMe slot and a replaceable compute module, and you can find one at a fair price. Check availability first. Yellow has been hard to get, and it may no longer be sold new. The official Home Assistant site is the place to confirm current stock.
Specs side by side
| Home Assistant Green | Home Assistant Yellow | |
|---|---|---|
| Form | Ready-to-use, fanless box | Kit: a board plus your own Compute Module 4 or 5 |
| Processor and memory | Rockchip RK3566 quad-core, 4 GB RAM | Depends on the Compute Module you choose |
| Storage | 32 GB eMMC, no M.2 slot | M.2 slot for an NVMe SSD; base storage depends on the module |
| Zigbee and Thread | No built-in radio; add a USB radio | Built-in radio for Zigbee or Thread |
| Network | Gigabit Ethernet | Gigabit Ethernet, with an optional PoE version |
| Display | HDMI for service and debugging, not a dashboard | Audio out and an expansion header |
| Setup | Plug in power and Ethernet | Install the Compute Module, and optionally an NVMe drive |
| Price | Launched at $99 in 2023; prices vary by region | Board plus module; usually more than Green |
Both boards run Home Assistant OS with one-click updates and full add-on support.
Zigbee and Thread
- Green: no built-in radio. For Zigbee or Thread, buy a USB radio from the Home Assistant Connect range or a similar coordinator. That’s an extra purchase.
- Yellow: the built-in radio handles Zigbee or Thread. It supports one of those protocols at a time, so pick the one your devices use.
Neither board’s built-in radio covers Z-Wave, so Z-Wave devices need a separate USB stick.
Storage and upgrades
- Green: the 32 GB eMMC is fine for many installs. If your history grows, trim how long Home Assistant keeps recorder data.
- Yellow: the NVMe slot gives you room for a longer history. You can also swap the Compute Module to change RAM, storage or CPU performance.
Setup and assembly
- Green arrives ready to use. Plug in power and Ethernet, and follow the onboarding steps.
- Yellow needs you to install your Compute Module and, optionally, an NVMe drive. Work with the power disconnected and take ESD precautions.
Which should you buy?
- Most people: Home Assistant Green. It’s simple to set up and needs no assembly.
- You want a Zigbee or Thread radio built in, and you can find a Yellow: Yellow. Compare its price with a Green plus a USB radio first.
- You want the lowest cost, or you already own hardware: a Raspberry Pi 5 or a used mini PC running Home Assistant OS. You’ll still need a radio for Zigbee, plus an SSD and a good power supply. See which Raspberry Pi do I need to run Home Assistant.
Check the radio you need
List the devices you plan to add before you buy. Zigbee bulbs and sensors, and Thread devices, work with Yellow’s built-in radio or a USB radio. Z-Wave locks and switches need a Z-Wave stick. If you already have a working USB radio, you may not need to pay for a built-in one.
For the full set of install routes, see how to install Home Assistant.