Quick answer
A wall-mounted Home Assistant screen is usually one of three things: an Android tablet running Fully Kiosk Browser, a dedicated wall panel, or a low-cost ESP32 board such as the CYD. Tablets are the quickest to set up. ESP32 boards usually cost the least but take the most work. Dedicated panels look the tidiest, with fewer choices.
Choose the hardware
- Android tablets. Popular choices include the Fire HD 8 and 10, the Samsung Galaxy Tab and the Lenovo Tab M10. Avoid ultra-cheap tablets, which often lag when you touch the screen.
- Dedicated wall panels. Purpose-built panels, such as the Shelly Wall Display XL or the Sonoff NSPanel Pro, are designed to sit in a wall box and show Home Assistant dashboards. Check the current setup guide for your model.
- ESP32 boards. The CYD (Cheap Yellow Display, often an ESP32-2432S028) is a small touchscreen board that you configure with ESPHome. Board revisions differ, and screen sizes vary between 2.8, 3.5 and 4 inches, so the display driver and touch calibration may need changing. ESP32-S3 panels are a similar option.
- Raspberry Pi. A Raspberry Pi with a touchscreen and a kiosk browser gives you full control, with more setup.
For a screen that only shows information, see the smart display comparison.
Set up Fully Kiosk Browser
Fully Kiosk Browser runs on Android only.
- Install Fully Kiosk Browser from Google Play or an APK, and grant the permissions it asks for.
- Set the start URL to your Home Assistant address, such as
http://YOUR_HA_IP:8123, and turn on full-screen mode. - Set a Remote Admin password in the app. Home Assistant needs it to control the tablet.
- In Home Assistant, go to Settings, then Devices & services, and add the Fully Kiosk Browser integration. Enter the tablet’s IP address and the Remote Admin password.
The free version runs the dashboard. The Plus licence is a one-time payment per device, and it adds features. Fully Kiosk can lock the screen, start on boot, follow a screen schedule, wake the display on motion, and expose a REST API. It also reports sensors such as battery level to Home Assistant.
If the dashboard stops at a splash screen, check the Android System WebView settings. Some people prefer Fully Kiosk for its lockdown features, while others get a simpler setup with the native Companion app. Try both on your own tablet.
The CYD and other ESP32 boards
The CYD is a good low-cost way to build a small wall or desk panel. It runs ESPHome firmware, which you flash over USB, sometimes with the Boot button held down.
- Build the interface. Write the display and touch setup in ESPHome YAML, often with LVGL for buttons and tiles. Community generators and templates can give you a starting point.
- Connect it. Add the device through Home Assistant’s ESPHome integration.
- Allow service calls. To let on-screen buttons call Home Assistant services directly, enable “Allow the device to perform Home Assistant actions” in the device’s settings in that integration.
- Expect some tuning. Touch orientation may need
swap_xyor mirror settings, and some revisions need different driver settings. Check your board’s model before you copy a configuration.
Power and mounting
- Power. A wall screen needs a steady supply. Options include a cable run to a power point, PoE or USB routing, or trickle charging for battery-powered devices.
- Mounts. Choose a flush wall mount, a desk stand or a magnetic mount, depending on where the screen goes.
- Mains wiring. If a panel needs mains power inside a wall box, have a qualified electrician do the wiring.
Screen wake and sleep
Opinions differ on how well wake-on-touch works across setups, so test the behaviour on your hardware. The WallPanel plugin and motion or presence automations can dim, blank or wake a screen. A simple example is dimming the screen at night and waking it when someone walks past.
Family dashboards
A family dashboard should be easy to read at a glance. A simple layout might include:
- a calendar card, which is built into Home Assistant, listing the calendars the household shares;
- shared shopping or task lists;
- weather and a few key sensors, such as the front door;
- the scenes people use most, such as “Leaving” or “Bedtime”.
Use large tiles and clear labels, since people read the screen from across a room. Think about privacy too. If the screen shows where people are, ask everyone in the house first. The map card guide covers the location options. Keep layouts simple, and use separate views for different people if you need them. The grid card guide explains how to arrange cards in columns.
Troubleshooting
- The screen stays black after a restart. Check that the start-on-boot setting is on in Fully Kiosk.
- Touch feels laggy. Check the tablet’s age, and reduce the number of camera streams and heavy cards on the page.
- An ESP32 board won’t connect. Confirm the board model and its ESPHome configuration, then check the ESPHome logs.
- CYD buttons don’t trigger anything. Check that the service-call setting is enabled in the ESPHome integration.
If you’re deciding on a tablet for a wall, the iPad guide compares it with Android options, and the Home Assistant dashboards guide covers layout basics.